12kv Insulated Protective Cap
Specifications
| ⚫Rated Voltage | 12kV |
| ⚫Rated Current | 630A |
KEY FEATURES
The 12kV 630A Insulated Protective Cap can be used for temporary or permanent applications and provides a submersible, fully shielded insulated cap for energized bushings. When installed on a IEC bushing interface or junctions, it is properly grounded using the attached drain wire, and providing physically seal and electrically insulate bushing interfaces. The 12kV 630A insulated cap design incorporates peroxide cured, EPDM insulation rubber, and a semi-conducting insert and outer shield.
Product Structure
⚫Operating Ring:Made of Stainless Steel,Convenient for product installation and operation.
⚫Insulation Layer:Unique formula and mixing technology ensure the high-quality of prefabricated EPDM Insulation rubber.
⚫Outer Semi Conductive Layer:Prefabricated EPDM conductive rubber meets IEEE592 standard.
⚫Internal Thread:The internal thread is M16-2
⚫Grounding Eye:Ground the product through the grounding eye.
